PORSCHE 986 SERVICE KIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Brake service kit contains only oe parts: - brakediscs - brake-pads - warning contact's - caliper screws - damping plates
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Brake service kit contains: - brakediscs sport ( drilled ) - brake-pads - warning contact's - brake caliper srews - repairkit installation parts brake pads
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Brake service kit contains only oe parts: - brakediscs - brake-pads - warning contact's - caliper screws - mounting kit center lock
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$4,719.00
Make a selection
Brake service kit contains: - brake discs - brake pads - caliper screws - warning contacts everything you need to service your front brake complete.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$5,060.20
Make a selection
$8,138.86
Make a selection
For drivers who need something even tougher than a standard stoptech sport rotor, but are not ready for a big brake kit, stoptech offers cryogenically treated cryo rotors.
Cryogenic treatment is a one-time stress relief process that involves both cold and heat cycling of the brake rotor. Using a proprietary computer-controlled process over a 24-hour period, the cryo machine gradually cools the rotors down to -300? F, then gradually brings them up to over +300? F, and finally back to room temperature. This conditioning of the rotor improves its service life, especially in fleet and emergency vehicle applications.
Features:
Extends the service life of the brake rotor
General Fitment 924 1980-85 924 1986-88 928 1978-82 928 1983-86 944 1982-85 944 1985-88
There are not many warning signs of an impending ims failure short of a “death rattle” that occurs as the bearing fails and comes apart. These kits replace the factory sealed bearing with a new, severe duty custom ceramic hybrid roller ball bearing for reduced friction and superior performance in poorly lubricated operating conditions and replaces the factory ims flange hub, bearing support, and fastener with a stronger, revised billet chromoly assembly. The center bearing support also receives an increase in size and no longer is cut for the o-ring that keep engine oil from leaking out of the engine - we have relocated the o-ring to the ims hub flange for added strength to the center stud & bearing support...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 BOXSTER 1997-04 911 1998-05 911 1987-89
For drivers who need something even tougher than a standard stoptech sport rotor, but are not ready for a big brake kit, stoptech offers cryogenically treated cryo rotors.
Cryogenic treatment is a one-time stress relief process that involves both cold and heat cycling of the brake rotor. Using a proprietary computer-controlled process over a 24-hour period, the cryo machine gradually cools the rotors down to -300_ f, then gradually brings them up to over +300_ f, and finally back to room temperature. This conditioning of the rotor improves its service life, especially in fleet and emergency vehicle applications.
Features:
Extends the service life of the brake rotor
General Fitment 924 1980-85 924 1986-88 944 1982-85 944 1985-88
For drivers who need something even tougher than a standard stoptech sport rotor, but are not ready for a big brake kit, stoptech offers cryogenically treated cryo rotors.
Cryogenic treatment is a one-time stress relief process that involves both cold and heat cycling of the brake rotor. Using a proprietary computer-controlled process over a 24-hour period, the cryo machine gradually cools the rotors down to -300? F, then gradually brings them up to over +300? F, and finally back to room temperature. This conditioning of the rotor improves its service life, especially in fleet and emergency vehicle applications.
Features:
Extends the service life of the brake rotor
General Fitment 924 1980-85 924 1986-88 928 1978-82 928 1983-86 944 1982-85 944 1985-88
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,261.40
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter, sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 178kw (242hp) @ 6500rpm
Max. Torque - 290nm (214lbf ft) @ 5000rpm
Max. Speed - 261km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,901.90
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter and sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 173kw (235hp) @ 6500rpm
Max. Torque - 280nm (207lbf ft) @ 4750rpm
Max. Speed - 257km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
This kit was designed to efficiently remove and install the wheel bearing and hub of spindle assemblies. Built-in self centering mechanism and incorporates a roller thrust bearing which lines up straight as an arrow during removal and reinstallation. These kits have a 20 year service history at thousands of repair shops. Every kit comes with a detailed instruction manual and does not require a hydraulic press. These kits are specific to the Porsche models listed.
( this is only for wheel bearings only) please call our office for availability.
General Fitment 911 1989-94 911 1994-98 911 1974-77 911 1978-83 911 1984-86 911 1987-89 944 1985-88 944 1989-91 968 1992-95 924 1986-88 BOXSTER 1997-04
For drivers who need something even tougher than a standard stoptech sport rotor, but are not ready for a big brake kit, stoptech offers cryogenically treated cryo rotors.
Cryogenic treatment is a one-time stress relief process that involves both cold and heat cycling of the brake rotor. Using a proprietary computer-controlled process over a 24-hour period, the cryo machine gradually cools the rotors down to -300_ f, then gradually brings them up to over +300_ f, and finally back to room temperature. This conditioning of the rotor improves its service life, especially in fleet and emergency vehicle applications.
Features:
Extends the service life of the brake rotor
General Fitment CAYENNE 2003-06 CAYENNE 2007-10 CAYENNE 2011-14
Ims solution. Solid bearing replacement with oiling system.
Only for cars originally equipped with a single row ims bearing (original cover dish depth = 19.27 mm).
Kit contains: ims solution plain bearing, ims solution flange, press-in ims tube plug, bearing support bolt, shim, circlip, bolts, spin-on oil filter adapter with oiling port, oil line & fittings, oil filter.
Requires ims tool set #10 0125 001, and ims supplemental tool set #10 0125 003. Enables bearing update without engine removal.
Replacement oil filter for this update, use # 10 0270 006.
The ims solution is designed to last the lifetime of the engine and does not have a service interval.
Installation by an automotive professional is require...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 BOXSTER 1997-04 911 1998-05
$1,756.89
Make a selection
For drivers who need something even tougher than a standard stoptech sport rotor, but are not ready for a big brake kit, stoptech offers cryogenically treated cryo rotors.
Cryogenic treatment is a one-time stress relief process that involves both cold and heat cycling of the brake rotor. Using a proprietary computer-controlled process over a 24-hour period, the cryo machine gradually cools the rotors down to -300_ f, then gradually brings them up to over +300_ f, and finally back to room temperature. This conditioning of the rotor improves its service life, especially in fleet and emergency vehicle applications.
Features:
Extends the service life of the brake rotor
General Fitment 911 1984-86 911 1987-89 911 1989-94
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|